A SHORT HISTORY OF SELLERS COMPANY

The William Sellers Company, in the late 1800's, introduced the 60 degree thread form which  ultimately became the U.S.
Standard. Then, in the early 1900's, William Sellers Company again introduced another innovation, the Sellers Drill Point,
which later also became the standard drill point form in the U.S.

At about the same time, William Sellers Company developed the Sellers Drill Point Sharpener to grind the new drill point form  
they had introduced. Universally recognized as one of the first, and possibly the finest Drill Point Grinder, the Sellers Drill
Point Grinder was a dramatic innovation when it was introduced in the 1920's, as it allowed all shops to re-sharpen drills to
"as new" standards; eliminating "freehand" sharpening..  

The simplicity of design, the rapid learning cycle, the ease operation, and the ruggedness of the machine made for the quick
and widespread acceptance of this extraordinary drill grinder. Now, over 80 years after its introduction, with several updates
to the design, Sellers Drill Point Sharpeners are still among the most efficient Drill Grinders available. We regularly see Sellers
Drill Grinders built in the 1920's, still in daily operation.

In the early 1950's The Farrel Company of Ansonia, CT acquired the William Sellers Company. Some time later the name
SELLERS was abandoned in favor of the trade name FARREL, but the basic design remained the same and replacement parts
were and still are interchangeable.
WELCOME TO
SELLERS MACHINE TOOLS




FARREL
AND
SELLERS DRILL GRINDERS
MODELS
1G  -  1G-1  - 1G-A  -  1G-A1 -  6G  -  6G-A  -  10G

FOR A FREE MANUAL AND PARTS LIST FOR YOUR
FARREL OR SELLERS
DRILL GRINDER
PLEASE USE THE NAVIGATION BAR
AND
CONTACT US

YOUR MANUAL WILL BE SENT  PROMPTLY BY
e-mail
PLEASE INCLUDE THE MODEL #  &  SERIAL  #
THIS IS A LIMITED TIME OFFER
YOU MUST HAVE ADOBE READER TO VIEW THE MANUAL
We accept all major credit cards
FARREL
6G-A
DRILL GRINDER
FARREL 1G-A1
DRILL GRINDER
FARREL AND SELLERS
REPLACEMENT PARTS

Farmington Manufacturing
Company stocks replacement
parts for all models of
Farrel and Sellers
Drill Grinders
Our stock includes:

Grinding Wheels
Steel Ends
Centers
Guide Rods
Chuck Assemblies
and
Leather Belting
for our older machines
Farrel is the registered Trademark of The Farrel Corporation
and is not affiliated with Farmington Manufacturing Company
Farrel does not support or provide service for any Farrel or Sellers Drill Grinders
FARREL & SELLERS
1G AND 1G-A
DRILL GRINDERS
For drill grinding drills from # 70 to 1" dia, these rugged, high precision drill point  sharpeners are designed for
rapid, accurate sharpening of drills, even by the least experienced operator.

The long life of these machines is confirmed by the large number of machines originally built in the 1920's and
30's still in daily operation.

The Sellers principle of Drill Grinding results in drill points that cut faster, drill through more inches of metal per
grind,and produce holes that are true cylinders. It is easy to produce a scientifically correct drill point with a
Sellers Drill Grinder

The 1G-A and the 1G-A1 are  newer designs but all models are efficient and easy to operate. Both models are
recommended equally.

REBUILDING YOUR SELLERS OR FARREL DRILL GRINDER

Call us today for a quotation to rebuild your machine.

If you do not currently own a Farrel or Sellers Drill Grinder,
CONTACT US
We try to keep several rebuilt machines in stock
SELLERS
1-G AND 1G-A DRILL GRINDERS
For sharpening drills from 5/16" dia. to 3" dia. the 6G AND 6G-A  series
of
Farrel and Sellers Drill Grinders are extremely heavy duty and built
for long term use to re-sharpen larger diameter drills to precision
"as new" tolerances.

Simple to use, easy to learn and a boost to your production, properly
sharpened drills add dollars to your bottom line every day.

Both
Sellers Model 6G and Farrel  6G-A Drill Grinder are still fully
supported by us with all required replacement parts.

We offer full rebuilding services for all Farrel and Sellers Drill
Grinders
FARREL & SELLERS 6GA and 6G DRILL GRINDERS
SELLERS 1G-1
DRILL GRINDER
SELLERS
6-G
DRILL GRINDER
WE ALSO REBUILD ALL
DRILL GRINDERS TO NEW
OEM SPECIFICATIONS.

OUR "AS NEW" ONE YEAR
LIMITED WARRANTY IS
STANDARD ON ALL
REBUILDS
FARMINGTON MANUFACTURING COMPANY
FARMINGTON MANUFACTURING COMPANY
92 Tanglewood Drive
Henderson, NV 89012
702-953-9858

sales@farmingtonmfg.com
CONTACT US


PARDON US WHILE WE ADD MORE CONTENT TO OUR WEB SITE.
WE WILL BE ADDING INFORMATION REGARDING OUR REBUILDING SERVICES

IF YOU NEED TO HAVE ONE OF YOUR MACHINES REBUILT NOW, PLEASE CONTACT US FOR A
QUOTATION.

WE WILL HAVE MUCH MORE INFORMATION POSTED SOON.
DESIGNING AND BUILDING
PRECISION MACHINERY FOR
SPACE -  SCIENCE - METALWORKING -  TECHNOLOGY
SINCE 1953
702-953-9858


WE REBUILD FARREL AND SELLERS DRILL GRINDERS  TO "AS NEW" CONDITION