FARMINGTON MANUFACTURING COMPANY
DESIGNING AND BUILDING
PRECISION MACHINERY FOR
SPACE -  SCIENCE - METALWORKING -  TECHNOLOGY
SINCE 1953
702-953-9858

PRE-FILL ASSEMBLY SEAL KIT
The sure sign that your Pre-fill valve needs
rebuilding is that the pressure will continually
drop while attempting to build hi tonnage.
This
kit has all of the required components; seals,
piston rings, O rings, and back up rings to
return the Pre-fill Valve to "As New "
condition. All parts are easily installed by
your in-house maintenance technicians.
Your production will increase immediately.

MAIN RAM PACKING
Replacing this packing it will stop the
excessive leaking around the main ram and
save you thousands of dollars in lost oil.

SIDE CYLINDER REBUILD KIT
This rebuild kit renews the hydraulic side
cylinders with new bronze guide bushings,
seals, packings O rings, Back Up rings and
all other components necessary to return the
cylinders to "As New" condition.  Another
source of slow down and oil loss.

KNOCK OUT CYLINDER REBUILD KIT
This rebuild kit renews the hydraulic side
cylinders with new bronze guide bushings,
seals, packings O rings, Back Up rings and
all other components necessary to return
the cylinders to "As New" condition.

TIE ROD BUSHINGS AND SHOES
The tie rod bushings and shoes are key to
maintaining alignment of your molds. As the
machine ages, the bronze bushings and
shoes wear and  you gradually lose
alignment. To protect your molds replace
the bushings and shoes as they show signs
of significant wear.

MAIN CYLINDER BUSHING
After 15 or so years, depending on use,  we
have noticed  that there may be an
excessive  amount of wear in the Cylinder
Bushing that requires the bushing to be
replaced. You can easily see when the
cylinder bushing needs replacement by
observing the up and down movement of
the Main Ram during the clamp cycle. With
excessive wear, the ram will have a
significant amount  of up and down
movement during the clamp and un-clamp
cycle.
PLEASE
NOTE

All of the replacement parts
described herein can easily be
easily installed by your own
in-house maintenance staff.

We are always available to
provide FREE technical
assistance, over the telephone,
should you need further
information or instruction.

FARREL AND CONLON HYDRAULIC CLAMP ASSEMBLY

OUR
PRODUCTS

FARREL - CONLON - LOMBARD
PLASTIC INJECTION MOLDING MACHINES
***TIP***
YOUR
FARREL OR CONLON
INJECTION MOLDING MACHINE IS SPECIFICALLY DESIGNED
TO BE EASILY MAINTAINED AND REPAIRED BY YOUR IN-HOUSE STAFF
FARREL AND CONLON INJECTION UNIT
The Injection Unit on your Farrel
or Conlon Injection Molding
Machine is designed to be easily
repaired. Seals, bushings and
rotating components are all
easily accessible and can be
replaced  by your own
maintenance staff.


INJECTION CYLINDER
Leakage around the rotating
shaft of the Injection Unit
indicates, not just a worn seal,
but rather the Bronze Bearing
Bushing  in the center of the unit
is worn over size and must be
replaced. At the same time that
bushing is replaced, the other
internal components, such as O
rings, piston rings and seals
should be replaced.

Our Injection Cylinder Repair Kit
will replace all critical
components. Everything is
included in the single kit to
ensure a complete renewal of the
Injection Cylinder is properly
refurbished.

Keep your machines running
profitably

CALL TODAY
ORDER THE PARTS KITS YOU
NEED
INJECTION DRIVE ASSEMBLY
Only a very few items in the drive
assembly need replacing  and
then only after the Drive
Motor has been removed for
service. Those items are
primarily dust seals, grease
seals, and O rings.


It is the ease of repair of the
Clamp Assembly and the  
Injection Unit that gives
confidence to our customers
that Farrel and Conlon Plastic
Injection Molding Machines

are a continuing, profitable
investment.  

FIRST:   Identify the
problems your machine
is experiencing.

Leaks - Worn
       
c
omponents        
Slow Operation

SECOND: Prioritize the
problems.

THIRD:  Contact us and
order the Genuine
Conlon Replacement
Parts Kit that will solve
the most critical
problem,first.

FOURTH:  As your
production permits,
order the additional
Genuine Conlon
Replacement Parts Kits  
to rebuild and return
your machine to original
condition..

FIFTH:
  MAKE MORE
PROFITS.
HOW TO  REBUILD
YOUR
FARREL- CONLON
INJECTION MOLDING
MACHINE.
FARREL - CONLON - LOMBARD
MECHANICAL TOGGLE TYPE
PLASTIC INJECTION MOLDING MACHINES
The Toggle Mechanism shown in
the two illustrations above are the
heart of the Farrel and Conlon
Mechanical Injection Molding
Machines.

We provide replacement parts for
all of these fine machines  From
Toggle Pins and Bushings,
Crosshead Bushings and Pins,  
Links, Tie Rod Bushings,  and  Tie
Rods, we supply them all.

Let us help you keep your
machines in the best operating
condition possible. Call for free
telephone assistance. We would
be  pleased to be able to be of
service,

CALL TODAY

860-677-8995
The Toggle Mechanism typically
can be rebuilt by your in house
maintenance staff. However, we
also offer complete rebuilding
service for all toggle assemblies.
Simply unbolt the entire clamp
assembly from your machine and
send it to us , by truck and we will
rebuild the entire assembly, return
it to you and assist with the
re-installation.

LET US PROVIDE YOU WITH A
QUOTATION FOR THE
NECESSARY PARTS FOR YOU
TO REBUILD YOUR MACHINE.
OR
FOR US TO REBUILD THE
CLAMP ASSEMBLY IN OUR
FACILITY.

Always replace the
valve  springs, if the
valve has them.

The valves operate for
extended periods of
time with little or no
maintenance required
.

But, the springs
eventually lose their

compression in the
working
length
of the spring and then
the valve fails, usually
intermittently until the
spring eventually breaks
and destroys the entire
valve.


Save yourself a lot of
unnecessary
aggravation.

Replace old v
alve
s
prings
A QUICK NOTE ABOUT
YOUR VALVES
ON YOUR MACHINES

TIP
PLEASE HAVE YOUR
MODEL # AND SERIAL #
AVAILABLE WHEN YOU  
CALL FOR INFORMATION
REPLACEMENT PARTS ARE AVAILABLE FOR ALL

FARREL INJECTION
MOLDING MACHINES

FROM 75 TONS TO 3000 TONS

ALL PARTS ARE MANUFACTURED TO
ORIGINAL SPECIFICATIONS AND
DIMENSIONS

WE CARRY A LARGE STOCK
OF REPLACEMENT  PARTS FOR THESE
FINE MACHINES
MAIN RAM PACKINGS

INJECTION CYLINDER
REPAIR KITS

ADVANCE CYLINDER
REPAIR KITS

TIE ROD BUSHINGS

TIE RODS

AND MUCH  MORE
CALL TODAY